| Spectral range |
1000-2200 nm (10000-4500 cm-1) |
| Spectral resolution without apodization |
0.65 cm-1 |
| Reproducibility of wavenumber measurements |
±0.004 cm-1 |
| Wavenumber measurement error |
±0.02 cm-1 |
| Detector |
PD-24-20 |
| Reflectance Probe |
Optical fibers:
Probe tip materials: |
Low OH fibers, Ø 200μ (without coating)
Minimum bend radius: 200 mm
Stainless steel with sapphire window
No adhesives used |
| Signal-to-noise ratio on the 2m Reflectance Probe, %, at resolution of 4 cm-1, with a one minute measurement time |
Better than 5000:1 (peak-to-peak% R for 100% line) at 6000±100 cm-1 |
| Level of positive and negative pseudo scattered light, reflectance % |
±0.25 |
| Deviation of the 100% line from the rated value during 8 h operation after ½ h warm-up, %, at resolution of 4 cm-1 |
±0.5 |
| Warm-up time |
approx. 1/2 hour at 25°C |
| Reproducibility of absorbance measurements |
0.005 Au |
| Absorbance measurement error |
0.05 Au |
| Power requirements |
90-260 Vac, 60/50 Hz ±2 Hz |
| Power consumption |
130 VA |
| Dimensions |
533x340x305 ìì |
| Weight |
28 kg |
| Operating conditions |
5° - 40°C, up to 95% relative humidity,non-condensing Optics sealed against humidityand dust |
| PC-system requirements |
Windows®-95/98/NT or higher versions |
| Connection to PC |
Parallel interface in EPP mode |
